A concrete artifact factory deals with multiple steps in a process with real challenges. The manager of this area usually needs to do everything necessary in less and less time, in addition to dealing with cost management and information. But how do you increase productivity on that scale?
An industry that seeks to improve the quality of its products and services without waste needs to focus on issues such as the use of concrete self-compacting, the layout of the plant of the plant, and the investment in reliable inputs, such as additives , aggregates and the cement.
In this article, we will show you which options can considerably increase the productivity of a plant. Read on and check it out!
Process automation is an issue that must be increasingly considered in these environments. This is because the technology market offers solutions that present the chance of producing more with less labor. As a result, long-term profits tend to be higher.
Thinking about replacing or relocating employees is not an easy alternative and must be taken very carefully. However, depending on the stage of the process that you automate, you can also gain by optimizing your factory space and increasing your production potential, saving on labor.
Does that seem difficult at the moment? So, stay calm. There are measures with more practical and immediate effects, such as the purchase of good additives.
We just sent you a message in your email. See if it arrived in the inbox or in the spam.
Oops! There was an error. Check that you filled it out correctly.
Subscribe and Receive Exclusive Content
Use the right products
Using the right products may be the best strategy for those looking to increase efficiency on the production line. If you want to know how to do this, check out some products you need to have.
The market offers many types of additives to improve concrete efficiency and enhance the functionality of what is one of the most used materials in construction. Through these products, it is possible waterproof, accelerate curing, decrease surface tension and improve fluidity for use in mechanical applicators.
Count on good superplasticizing additives It is a guarantee of displaying products that offer real benefits to your customers. This shows that you know how to optimize the properties of concrete and can become a reference in the subject.
Chemical cures
The formula of Chemical cure it is calculated to reduce the loss of surface moisture in concrete by up to 90% due to wind. These products aim for more strength and better finish for concrete. Both benefits lie in a single application that slows water loss and chemically increases concrete strength.
A good chemical curing additive is one that, in addition to these benefits, also protects the surface, without leaving any residue. Therefore, look for options that offer synthetic polymer membranes and work for all types of concrete bodies.
Surface hardeners
Another solution that you need to have in your factory are the surface hardeners. They are products designed to increase the durability and strength of concrete floors.
It is the reaction between the product and the hydrated cement compounds that generates compounds with greater hardness. Through this process, concrete becomes more resistant to wear and has better water resistance indices.
In addition, they increase the mechanical resistance to abrasion of the concrete surface, reducing dust accumulation without yellowing.
Surface water repellants
There's no use manufacturing the best parts on the market if they are left unprotected when they leave your factory. Their beauty and durability will depend on how protected they will be over time.
For this purpose, there are the water repellents of surfaces, which can be applied both to cementitious parts in vertical, as in horizontal. In both cases, using the correct product will not alter the brightness or color of the material, but will provide the assurance that your pieces will be well protected.
Choose good suppliers
Choosing good suppliers is also essential to increase your productivity. It works as an alliance of professional commitment, which depends on a good relationship so that there is more and more quality of the service offered.
We hope this article helped you understand some important steps on how to increase plant productivity efficiently. Remember that the lack of good suppliers tends to harm the factory's internal processes, affecting the company's reputation and opening doors to financial losses.
Did you like the article? Subscribe to our newsletter and don't miss our news and tips on the subject.
BLOK'S BLOG
Join the team of the best professionals in the construction industry and always be informed about the greatest advances in your profession.
.webp)
