To ensure greater durability of the structure and safety of buildings, homes and businesses, it is important to invest in waterproofing Of water tanks and reservoirs.
In addition to conserving the infrastructure, the process prevents leaks and infiltrations and reduces the risk of clogging the hydraulic networks and also of water contamination.
The infiltration of buildings It is the most common problem when there are faults in waterproofing of the water tank, which may cause carbonation and corrosion of the reinforcements of the concrete.
Infiltration can affect the strength of the concrete and compromise the structural function of the building. They can appear on walls, foundations and slabs, causing aesthetic damage to the plastering or painting.
The waterproofing of water tanks and reservoirs is a guarantee of quality of life and economy.
Performed correctly, the product hinders the appearance of possible spots of water contamination, which harm human health.
Do you want to know more about it? Read this article to the end and find out how to properly do waterproofing. Follow up!
Blok ST
Waterproofing Resin for Structured Flexible Polymer Mortar
Two important points to consider before starting the process of waterproofing of water tank: the type of water tank and the type of material.
Water tanks can be suspended or buried and each material may require different procedures. To carry out the waterproofing, a professional must be consulted and, according to technical advice, the decision will be taken.
In traditional methods, there are rigid and flexible systems, which can be used in water tanks and reservoirs.
Rigids are chemical additives that are mixed into mortar or concrete at the time of application. They must be used in structures with little mobility and often require several layers until the completion of the waterproofing process.
For flexible systems, membranes molded in place are applied, mixed with cement to ensure perfect waterproofing in a medium with constant water pressure.
Each of these processes has its own way of being applied and a drying time. The waterproofing agent must be used on structures in good condition.
In case of maintenance, the old waterproofing layer must be completely removed.
Therefore, it is essential to have the support of a quality professional, in addition to the use of good products.
We just sent you a message in your email. See if it arrived in the inbox or in the spam.
Oops! There was an error. Check that you filled it out correctly.
Subscribe and Receive Exclusive Content
Buried water tanks
In this type of structure, it is important to emphasize the importance, not only of waterproofing on the inside of it, but also on the outside of the structure.
In this way, the protection of the structure will be guaranteed, so that both the water inside and the water outside do not compromise the integrity of the water tank over time
Avoid some mistakes when choosing materials
When to choose waterproofing agents for water tanks, two factors are important regarding the material.
As the water will be in direct contact with the waterproofing agent, it is very important that it does not release products that could compromise the drinkability of the water and thus harm the health of those who are going to consume it.
In this case, it is not advisable to use primarily asphalt waterproofing.
Another very important factor is to verify that the waterproofing agent is able to remain with water in constant contact without its degradation. Generally, acrylic membranes, known as “acrylic liquid blankets” are not recommended for this application.
What is the importance of using quality products?
To guarantee economy, more durability and safety, it is essential to use quality products for waterproofing water tanks and reservoirs.
By using good products, you avoid frequent maintenance and ensure that the deterioration process does not interfere with water quality.
These solutions will be defined according to the conditions of the structure and the installation location.
The most suitable products for performing this procedure are polymer mortars. The systems are not definitive and it is always important to be aware of possible maintenance.
All care for waterproofing of water tanks must be taken from the beginning of the work.
Talk to your engineer, research the different types available on the market and their applications.
Thus, you avoid unpleasant problems in the future, guarantee savings and peace of mind for your work.
Did you like the post? Follow Blok on social media and keep up to date with all the news on a daily basis: Facebook, LinkedIn, YouTube and Instagram!
BLOK'S BLOG
Join the team of the best professionals in the construction industry and always be informed about the greatest advances in your profession.
.webp)
![[Free Book] Negative and Positive Pressure Waterproofing](https://cdn.prod.website-files.com/5b5694df76451f74367f58e3/65a9d1278079f3bf14823e7e_impermeabilizac%2525CC%2525A7a%2525CC%252583o-pressa%2525CC%252583o-negativa-e-positiva---BLOK.webp)
